Characteristics of sync
Auto-Trak Sensitivity
Sensitivity shooting, cycling and adaptive leakage compensation, available in all modes and applicable only passive circuits
Adjustable flow activation
1 to 9 l / min (available in all modes and types of circuit)
Circuit Types
With active exhalation valve with proximal airway pressure
With active exhalation valve flow sensor
With passive exhalation port
Controls
IPAP 4 to 50 cmH2O
EPAP / PEEP
0 to 25 cmH2O (circuits with active valve)
4 to 25 cmH2O (circuits with passive drain port)
CPAP
4 to 20 cmH2O (circuits with passive drain port)
Support pressure from 0 to 30 cmH2O
Tidal volume 50 to 2000 ml
Respiratory rate
0-60 rpm (Mode A / C)
1-60 rpm (all remaining modes)
Inspiratory Time 0.3 to 5.0 s
Rise time 1 - 6 (relative scale)
Ramp Start Pressure
0 to 25 cmH2O (active circuits)
4 to 25 cmH2O (passive circuits)
4 to 19 cmH2O (CPAP)
Off Ramp, 5 - 45 min
C-Flex Off, 1 - 3 (relative scale)
Flow-trigger sensitivity 1 to 9 l / min
Cycled flow sensitivity 10 - 90%
Parameters monitored
Tidal Volume 0-2000 ml
Minute ventilation from 0 to 99 l / min
Estimated flight range of 000-200 l / min
Respiratory rate from 0 to 80 rpm
Inspiratory flow maximum 0 - 200 l / min
Maximal inspiratory pressure from 0 to 99 cmH2O
Mean airway pressure from 0 to 99 cmH2O
% Patient-initiated breaths 0 - 100%
I: E ratio 9,9:1 - 1:9,9
Alarms
Off circuit disconnection, 10 - 60 s
Off Apnea, 10 - 60 s and 4 - 60 rpm
Off high tidal volume, 50 - 2,000 ml
Off low tidal volume, 50 - 2,000 ml
High minute ventilation Off, 1 - 99 l / min
Off Low minute ventilation, 1 - 99 l / min
Off high respiratory rate, 4 - 80 rpm
Off Low respiratory rate, 4 - 80 rpm
Oxygen
FiO2 21-100%
2 min O2 flow at 100%
Inlet pressure range of O2 from 276 to 600 kPa (40 - 87 psi)
Environmental
Operating temperature 5 - 40 ° C
Storage Temperature -20 - 60 ° C
Relative Humidity 15 - 95%
Pressure from 60 to 110 kPa (450-825 mmHg)
Electrical
Input voltage 100 - 240 VAC, 50/60 Hz, 2.1 A oftware fan.
Removable battery voltage 14.4 VDC
Internal Battery 3 h in normal
Removable Battery 3 h in normal
Connecting external 12 VDC battery
Physical
Dimensions (L x W x H) 21.13 x 28.45 x 23.52 cm
Weight (with internal battery) 5.6 kg (12.4 lb)
Regulatory Compliance
IEC 60601-1 Medical electrical equipment Part 1: General safety requirements
IEC 60601-1-2 General Requirements for Safety - Standard Secondary Compatibility - Requirements and tests
IEC 60601-2-12 Medical electrical equipment Part 2-12: Particular requirements for safety of lung ventilators - Critical Care Ventilators |
